image-e33f680de06496ca4636a0f4d8532ff605cbb3b4-600x600-png

CCV-DR 150W

This Class I CCV-DR 0-10V dimming driver features a dual mode constant voltage and constant current output. Featuring a metal housing with Class I design which allows it to operate with case temperatures from -40°F to 194°F under free air convection. Standard builtin protections include short circuit, over-current, over-voltage, and over temperature. The metal housing carries an IP65 ingress protection allowing it to be used in both indoor and outdoor applications, with type HL rating for hazardous location use.

  • Constant voltage + Constant current modes
  • 3-in-1 dimming capable: 1~10VDC, 10V PWM and resistance dimming
  • Maximum wattage output up to 150W
  • Built-in active Power Factor Correction (PFC)
  • Class 2 design and IP65 rating
  • Auto-reset protection for short circuit and over-voltage
  • cURus Recognized to UL8750 Standard “Type HL”
SERIES
CCV-DR150
MAX LOAD
150W
MINIMUM LOAD
1W (Non-dimming); 90W (dimming)
INPUT VOLTAGE
90-305V AC
OUTPUT VOLTAGE
24V DC
DIMMABLE
1~10V DC, 10V PWM signal, and resistance
OPERATING TEMP
-40°F - 194°F (-40°C - 90°C)
RATING
cURus Recognized (Wet Location)
DIMENSIONS
9”L x 2-11/16”W x 1-1/2”H
CCV-DR150-24

CCV 24V - 150W 0-10V Dimmable Driver

SPECIFICATION SHEETS